3 Review(s)

This is a highly efficient water heater designed to instantly change cold water into hot water, meeting your various needs in the kitchen, bathroom, public restrooms, hotels, or hospitals. With its advanced and stylish design, it saves valuable space while being pleasing to the eye. After connecting to power, water is heated in approximately 10 seconds.Key Features & BenefitsIncredible Energy Savings: Exceptionally economical, consuming only 1 unit of power for every 64 liters of hot water. Enjoy savings of up to 40% on your water heating costs.Durable & Safe Construction: The body is made of durable ABS plastic for a long life. The inbuilt heating coil is composed of pure copper, which makes the product safer and more durable.Compact & Space-Saving Design:Dimensions: 9 (H) x 5 (W) x 9 (D) inchesConnector Size: 1/2 inch for both water inlet and outletSimple Installation: No additional, complicated plumbing is required for installation.Smart Temperature & Flow ControlFlow-Controlled Temperature: The output temperature is controlled by the rate of the water flow. A larger water flow results in a lower temperature, while a smaller water flow results in a higher temperature. It can provide hot water between 30°C and 55°C.Example: With a water flow of 4 to 6 liters per minute, the heating temperature is typically between 30°C and 48°C, depending on the temperature of the incoming water.Advanced Safety Features:Auto Power Cut-Off: For your safety, the unit automatically cuts off power if the water temperature reaches 65°C, preventing overheating.Dry-Heating Protection: The water heater will automatically turn off if the water flow is lower than 2 liters per minute or if the water flow stops completely.⚠️ Important Installation Notice ⚠️For the heater to work correctly and safely, your electrical setup MUST meet the following requirements:Working Current: The heater requires 16 Amperes (Amp).Wire Thickness: You must use a wire of at least 2.5 square millimeters.Circuit Breaker (MCB): Your circuit breaker must be able to handle 16 Amps.Please ensure your circuit can handle this load. The heater will not heat water effectively on a lower-rated circuit.