3 Review(s)

"Apar Scratch filler putty is best for filling and levelling minor dent and scratches on the metal surface. Before applying, clean the surface for any rust, dust, oil etc. sand with 320 no. grit sandpaper. Apply thin coats of Apar Scratch filler putty with putty knife whereever is necessary with 15 to 20 minutes flash off between coats. Deep dents shall be filled in thin layers with an interval of 20 minutes for each thin coat and allow to dry . After thorough drying, wet sand with 320 no. grit sandpaper and apply Apar primer surfacer spray paint and your required base coat or top coat paint.""Apar one step Rubbing and polishing compound is designed to remove finer sand scratches and delivers a mirror shine with durable protection in one step. The super quality abrasives cut fast to quickly remove swirls, scratches, and oxidation, It Cuts and polishes with both foam and wool pads. It delivers a perfect Gloss finish in less time. It is recommended to apply after 48 hrs with microfiber cloth over paint work, it removes overspray and merge with original paint finishHow To Apply:-Clean The surface of your car or bike, Apply Rubbing compound with soft cotton / microfiber cloth over a small area, rub into surface using a back and forth motion lightly. Sprinkle small amount of water over compound for smooth motionRemove excess cleaner and clean with dry cloth before it dries."