3 Review(s)

Apar Carb & Throttle body Cleaner Spray is a blend of fast acting solvents specifically formulated to penetrate, dissolve and clean gum, varnish, grease and dirt deposited on Carburetor and Linkages, Fuel injector, Throttle plate and air intake. Multipurpose cleaner that penetrates, flushes away and removes carbon deposits and Cleans sludge gums and varnish from throttle body assemblies and carburetors, suitable for choke valves, choke controls, fuel systems and discs. It is also used for cleaning Diesel pump and injectors, automatic chokes, manifold heat control valves and PCV valves. How To Apply:1-Disconnect the ground terminal from the battery for safety, and then disconnect All Hoses or air ducts attached to the throttle body, These should be identified and marked before removing so that you can reconnect after the cleaning.2-Shake the can well and target the nozzle towards the area of use . Use a small brush to loosen dirt and other deposits and then wipe off.3-This product is highly inflammable, do not spray on hot metal surface or when engine is hot. For carburetor engine, spray exterior of carburetor and linkages, Remove air filter and spray air intake and throttle plate. For injection engine, spray in air intake pipe open and of PVC valve