3 Review(s)

I. OPERATION:1. Place scale on a horizontal flat surface, press [ON/OFF] key toturn on the scale.2. Wait until 0.0! is displayed.3. Put the object(s) on the weighing platform.4. Using the [UNITS] key, you can switch between the weighing units.5. Using the [LIGHT] key, you can turn on or off the back light.II. TARE WEIGHING:1. Turn on scale as described above.2. Place the tare item! on the platform.3. Press [TARE] and wait until 0.0! is displayed.4. Add the net-weight-item!..III. COUNTING FUNCTION:1. Turn on the scale and wait until the LCD display 0.0!.2. Place a sample amount(25pcs, 50pcs, 75pcs or 100pcs) of thequantity you wish to weigh and count onto the platform.3. Press and HOLD [PCS] key for 2 seconds; the LCD will display arandom number, for example 100!.4. Press [UNITS] key to select the sample amount of the item that youhave put onto the platform.5. Press [PCS] key to confirm the above information, the LCD will nowdisplay in the corner to show that the scale is in counting mode.6. Remove the sample quantity from the platform.7. You now can place any amount of your item(s) in the scale and theLCD will display a count.8. You can switch between weighing mode and counting mode bypressing [UNITS] or [PCS] key respectively.IV.CALIBRATION:1. Reset the scale by pressing [ON/OFF] key.2. Wait until the LCD displays 0.0! and then press and HOLD [UNITS]key for 3 seconds, the LCD will display CAL!, and then release the[UNITS] key.3. Press [UNITS] key again, the LCD will display CAL! followed be therequired calibration weight.4. Add the required calibration weight, the display will show PASS!and return to normal weighing mode.5. Put away the calibration weight and press [ON/OFF] to turn off thescale and the calibration is finished!V. SEPCIFICATION:Calibration:High range:Auto calibrationTare full capacityAuto off:Operation temp:30 seconds off50-86 degrees FahrenheitPower:2 x AAA Batteries (Not included)User ManualThank you for purchasing our pocket scale.Please read all operatinginstructions carefully before use. This electronic scale is a precisioninstrument. With normal care and proper treatment, it will provideyears of reliable service.Never load the scale with more than the maximal capacity. Overloadingcan permanently damage the scale.Avoid any exposure to extreme heat or cold, always allow the scale toacclimate to normal room temperature for at least 1 hour before use.Give your scale sufficient warm up time. Usually 30 seconds to give theinternal components a chance to stabilize before calibration.Keep your scale in a clean environment. Dust, dirt, moisture, vibration,air currents and a close distance to other electronic equipment can allcause an adverse effect on the reliability and accuracy of your scale.Handle with care. Gently apply all items to be weighed onto tray.Although this scale is designed to be quite durable, try to avoid roughtreatment as this may permanently damage the internal sensor.Avoid shaking or dropping the scale. This is a precision instrument andmust be handle with extreme care.Only operate the scale on a stable, vibration free surface.