3 Review(s)

Our Scratch and Swirl Remover is formulated to save your car from small scratches, swirls, paint transfer and other marks that comes at the hands of other careless people and the environment. It is easy to use and can be applied by hand and machine. IT IS DESIGNED TO REMOVE MINOR / SMALL SCRATCHES WHERE THE PAINT HAS NOT BEEN REMOVED. IF YOU CAN FEEL THE SCRATCH WHILE RUNNING A FINGERNAIL THROUGH IT, THEN IT IS TOO DEEP IN THE PAINT AND WILL NOT BE REMOVED Directions : Instructions on how to use ? Auto Bros Ultimate Scratch and Swirl Remover can be applied with both hand and orbital machine(both rotary and dual action). Cover any plastic or rubber part with masking tape before applying the product, to prevent white residue deposition. NOTE : ALWAYS TEST ON A SMALL HIDDEN AREA TO TEST THE COMPATIBILITY AND MAXIMUM PRESSURE LEVELS, SO THE PAINT IS NOT DAMAGED DURING USE. 1) Vehicle should be out of direct sunlight, this improves the performance of the product. 2) Make sure the paint is clean and dry. For best results, wash the paint to remove any contaminants or deposits from the surface. 3) Apply a few pea size drops to a clean applicator pad and rub onto the affected area in a circular and overlapping motion. While rubbing the product, you will need to put pressure, but do not put so much pressure that it scratches the paint. 4) Continue rubbing the product into the surface as you notice it disappearing. Continue until it is almost completely dissolved. 5) If scratch has reduced, and there is scope for further removal, reapply the product again. 6) Using a clean microfiber cloth, remove the remaining product.