3 Review(s)

1. The heater is provided with a 3 core and a plug top. It is recommended that the unit should be used with a suitable & good quality three pin socket with proper earthing. It is mandatory to use the unit with proper earthing.2. The unit should be immersed such a vessel or a bucket so that the level of the water should be in between the "Maximum" marks indicated on the unit. Care should be taken to ensure that the bakelite connector is not immersed in water.3. The unit should NOT be hanged on the wall of the plastic bucket.4. The heater should be connected to the mains only after it is dipped in water.5. The power should be switched OFF and plug removed from the socket before the heater is removed from water.6. For personal safety and avoiding damage to the unit the heater should be removed from water only a minute or two after switching off the current and plug is removed from the socket.7. Do not bring the Immersion Heater in contact with any combustible material immediately after it's withdraw from water.8. The Immersion Heater is meant for heating water only and should not be used in any other liquid such as oil and/or milk etc.