3 Review(s)

How to easily install the Hydro-gel Membrane on your phone. NOTE: Install the screen guard in a No-Air Zone to avoid accumulation of dust. 1. Clean the phone display with the wet and dry wipes given and check for any dust present as the screen needs to be dust-free. 2. Remove the number 1 layer on the guard and align it on the phone screen from top to bottom and left to right accurately and swipe a debit/credit card. NOTE: You can lift the guard as many times as wanted for proper alignment as the guard is under layers 2 and 3. If there are bubbles forming during this process, it is absolutely fine and you need not worry about it. 3. After completing the alignment process, peel number 2 and swipe the card with a slight pressure to avoid forming bubbles as this is the final process of application. 4. Repeat the same process by peeling off number 3 on the screen guard. 5. Now remove the 4th layer from any corner which is on the extreme top. 6. Press and move your thumb on all the edges for the edges to stick perfectly. 7. Hurray !!!! The screen guard is now installed and the phone is ready for use.