3 Review(s)

The connection procedure is as follows: (1) First, clamp the red wire of the starting cable on the positive pole of the red battery of the "rescued". (2) Then clamp the red wire at the other end to the positive pole of the red battery of the rescue vehicle. (3) Clamp the black wire onto the black negative battery of the "saved". (4) Then clamp the black wire on the black negative battery of the "rescue vehicle". (5) Start the engine of the "rescue vehicle" first, and then start the engine of the "rescue vehicle". If you find that the rescued vehicle still cannot start, please check whether the metal contact part is in poor contact. After starting the engine, you still need to remove the starting wire in order, otherwise it may cause a short circuit. The procedure for removing the line is as follows: (1) First, remove the black wire of the "distressed vehicle". (2) Remove the black wire of the "rescue vehicle" again. (3) Then remove the red wire of the "rescue vehicle". (4) Finally, remove the red wire of "rescued" Descriptions: Name: Take the FireWire Specification: 1 pair FireWire