3 Review(s)

How to use :1. Align the middle of the bracket with the damaged position.2. Rotate the pressure cylinder onto the installed bracket.3. Put drop of repair fluid into the pressure cylinder.4. Rotate the pressure bar into the pressure cylinder and wait for about 15 minutes for the repair fluid to slowly enter the damaged area.5. Observe if the repair fluid is slowly squeezed into the damaged area until the repair is satisfactory.6. Remove the fixing bracket and observe the repair fluid penetration effect.7. Drop some repair solution into the damaged area and cover it firmly with curing film.8. Move the vehicle to the sunlight to fully absorb the UV rays and make the repair fluid solidify. (Note: must be placed in the sun to absorb UV rays and produce a focal point reaction before curing).9. After curing, remove the curing film and gently scrape off the solidified repair fluid with a razor blade.Attention:♦️ Take care that there is no water in the broken area before repair (water in the broken area cannot be repaired).♦️ Do not repair in the open air, as UV rays during the day will cause premature curing that cannot be repaired. Please work indoors, in underground garages or in sheltered repair locations.♦️ The damaged area must be dry and clean and free from dirt.♦️ The repair solution must be placed in the sun after penetration to absorb UV rays and produce a focal reaction before curing.