3 Review(s)

DARIT Emergency Exit Fire Alarm Button, Emergency Door Release Security Glass Break Alarm Switch for Home/Business Security Fire Panic Box. The soft glass is designed for easy breaking using a hand or fingers to apply pressure on the panel. The doors will remain open after the glass is broken. It provides a quick method of escape or evacuation that still maintains your security Used on all fire systems, break glass units raise the alarm manually when someone fractures the white glass or plastic. They are situated at exits, landings, corridors, fire escapes, or near high-risk areas (such as cookers and kitchens). DARIT conventional manual call point designed for conventional fire alarm system for reporting a fire or emergency condition by its PUSH IN/PULL DOWN handle latches. One 470 ohm resistor is used on the PCB board between Zone+ and Zone- when the switch inside is closed. So AS-MCP-05 conventional manual call point is only used with conventional fire alarm control panel, it is forbidden to be used to other systems. The manual call points provide a textured finger-hold area that includes Braille text. In addition, to PUSH IN and PULL DOWN text, there are arrows indicating how to operate the station, provided for non-English-speaking people. Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position, the word “ACTIVATED” appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag. Resetting the station is simple: insert the key, twist one quarter-turn, then open the station’s front cover, causing the spring-loaded operation handle to return to its original position. The alarm switch can then be reset to its normal (non-alarm) position manually (by hand) or by closing the station’s front cover, which automatically resets the switch.