3 Review(s)

Features: 1. Advanced NM Hot-wire alcohol sensor 2. Quick answer 3. SMD assembly, stable performance 4. Smart MCU inspection 5. Direct LCD indication test process 6. Digital LCD display with blue backup light 7. Portable and fashion design 8. Audio warning beyond pre-set limit 9. Auto control sensor failure 10. Battery saved design, indication of low voltage Description: Directions detailed on screen: Wait, Blow, Test, Read Range: 0.00-0.20BAC%; 0.00-2.00g/L, 0.00-2.00BAC‰; 0.00 to 1.00mg/L; 0.00-200mg/100mL Alarm level: 0.05BAC%; 0.50g/L; 0.50BAC‰; 0.25mg/L; 50mg/100mL Accuracy: ±10% F.S Color: Black Sensor type: Nano semi-conducted alcohol sensor Working power: DC4.5V (3 x AAA battery) Operating current: <= 120mA Using environment: temperature: 10 ~ 50 degrees Celsius, relative humidity: <= 95%, without glaze Time response test: <5 s Heat up time: <20 s Test range: (0.00-1.00) mg / L; 0.00-0.199% BAC; 0.00-1.9g / L) Density of alarm: 0.24 mg / L (0.05% BAC; 0.50g / L) Accuracy degree: + -10% FS Alarming ways: blue backlight 3 bit LCD data compare photo display Power by: 3x AAA batteries LCD Size: 1.7inch Color: Black Product size: 103 x 75 x 28 mm Product weight: 60g Package size: 158 x 105 x 50 mm Package weight: 133g Package Including: 1 x Alcohol Tester 5 x Mouthpieces (Mouthpiece not necessary–simply blow into groves for 3-5 seconds) 1 x User Manual Precautions: 1. Drink at least 20 minutes after the test, because alcohol from the digestive system to absorb blood about 20 minutes. Immediately drink test, the results can only reflect the mouth of the alcohol concentration, rather than the blood contained in the alcohol concentration. 2. Do not use directly chemical or corrosive solution to clean the product, to avoid the flow of liquid into the trachea. 3. If the product is in a high concentration of gas, the product does not work properly. 4. If the residual gas in the machine is too strong, the product will not show the results at the next test. Please lightly throw the product a couple of times to evaporate the inside of the product. 5. If the test is performed at low battery power, there will be a deviation between the test value and the true value. 6. It is strictly prohibited in paint, pesticides, alcohol and other corrosive gases or indoor air pollution and use. 7. Unauthorized repair and damage to the internal parts may cause the product to malfunction.