3 Review(s)

Color: Transparent Gross Weight: 88g Material: Stainless steel+PVC+ABS+glue Stickers nail size: 5cm*8cm (Length*Width). Screw rod Length: 6-16mm. Packing Specifications: 8 Pcs/Set Package included: 8*No trace stickers nail; 8*Screw nut. Installation steps are as follows: 1. Wipe the dust, grease on the wall with clean soft cloth and keep it fully dry. 2. Uncover barrier film on bottom layer. Don't touch sticking face with hand. 3. Position the position of sticking film, paste the patch affixed to the wall horizontally. 4. Flatten with force to the patch from inside to outside, press each region tightly to evacuate the air in the sticking patch. 5. Then install hanging rack and screw nut. 6. Check that the installation is against the wall. Notice: 1. Please pay attention that there are limits on painted walls, otherwise it might damaged your paint. Avoid using on uneven surface, the more smooth the wall, the better the results. 2.This screw can hold up to 8kg. But we'd like to suggest no more than 8kg for holding a long time. 3. Please clean the adhesive surface with water if it has dust covered before installation the hook. 4. Do not use it at temperatures above 80 degrees.