3 Review(s)

One Way Mirror Film—Our Day Time Privacy Window Film with its classical silver mirror look is going to transform your home and office windows and provide you enough privacy and protection. Key Features: Highly-reflective material provides superior daytime privacy while maintaining your view of the outside. This upgraded film can block most of the sun, reflect 99% of UV rays and 85% of infrared rays and reduce glare for increased interior comfort. The new strong glue design will help the mirror window film cling on the window surface firmly and make it available for long time use. ***The window film works only on flat, clean, and smooth surfaces. It will not stick well on plastic, broken or uneven surfaces. Installation Instructions: 1. Measure the surface and cut the film. Leave an extra inch margin on each side for an easy adjustment. 2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust. 3. Peel off the transparent backing film along a short side. 4. Spray a lot of water both on the adhesive side and window surface (Very Important!!!), then apply the film to the window. 5. use a squeegee to flatten the film gently and squeeze out bubbles little by little. 6. Trim off the margins and use a cloth to flatten out the film. Here you go! Note: 1. The privacy effect of the window film will vary with the change of light and angle. 2. The mirror effect means it has a slightly reflective effect, not totally like a mirror. 3. The different effects between daytime and night: The outside glass will show a mirror effect as well as keep your privacy during the daytime (If the people outside who is up close, it’s not completely invisible to the inside). At night, the outdoor glass will lose the mirror effect, and people outside can see Inside. Therefore, curtains are necessary at night...