3 Review(s)

This is an RFID starter learning kit for Pi. An RC522 RFID module, some common electronic components and sensors are included. The kit contains more than 180 components and electronic modules, these components can be divided into about 30 species. We have carefully prepared a guidebook, and supporting experimental code routine for you to learn. The guidebook includes 26 experiments, and the code is divided into two versions(C and Python). Through the learning, you will get a better understanding of RFID and Pi, and will be able to make fascinating works based on Pi. If you want to learn the basics of electronics and Linux programming, this kit is a wonderful choice for you. In the process of learning this kit, you will get perfect technical support. By learning this kit, you will be fully aware of the wonderful world of electronics and the fun of DIY. Package List:- 1x LCD 1602 Module, 1x Servo Motor, 1x Motion Sensor(Tilt Switch), 1x Light Sensor(Photocell), 1x Temperature Sensor, 1x Buzzer, 1x Relay, 2x Switch, 2x Button(Large), 1x Button Cap(red), 1x Button Cap(white), 4x Button(small), 1x Potentiometer, 1x RGB LED, 2x Green LED, 10x Red LED, 2x Yellow LED, 2x Blue LED, 2x NPN Transistor, 2x PNP Transistor, 2x Diode(1N4148), 2x Diode(1N4001), 16x Resistor(220O), 10x Resistor(1KO), 5x Resistor(10KO ), 5x Resistor(100KO), 5x Resistor(1MO), 5x Resistor(5.1MO), 1x Breadboard, 1x Hookup Wire Set, 10x Male to Female Jumper Wires, 1x Header(40pin), 1x Band Resistor Card, 1x Project Box