3 Review(s)

Package List: 1x DC Motor, 1x L9110 motor driver, 1x LCD1602, 1x ADC0832, 1x 74HC595, 1x 7-Segment Display, 1x Light Sensor (Photoresistor), 1x Analog Temperature Sensor (Thermistor), 1x 40 pin GPIO Extension Board, 1x 40 pin GPIO Cable, 1x Breadboard Power Supply Module, 1x Active Buzzer, 2x Switch, 1x RGB LED, 8x Red LED, 4x Green LED, 4x Yellow LED, 4x Blue LED, 16x Resistor(220O), 10x Resistor(1kO), 5x Resistor(10kO), 4x Capacitor (104), 2x Capacitor (10uF), 4x Button (large), 5x Button (small), 1x Button cap (red), 1x Button cap (white), 2x Button cap (blue), 2x NPN Transistor (8050), 2x PNP Transistor (8550), 2x 1N4148 Diode, 2x 1N4001 Diode, 1x Potentiometer (10KO), 1x Breadboard, 30x Male to Male Jumper Wires, 20x Male to Female Jumper Wires, 1x Header (40pin), 1x Band Resistor Card, 1x Project Box Lessons: About the Raspberry Pi Raspberry Pi Pin Numbering Introduction Raspberry Pi GPIO Library Introduction How to use the wiringPi and the RPi.GPIO Lesson 1 Blinking LED Lesson 2 Buzzer Lesson 3 Controlling an LED with a button Lesson 4 LED Flowing Lights Lesson 5 Breathing LED Lesson 6 Controlling a RGB LED with PWM Lesson 7 7-segment display Lesson 8 How to drive a 7-segment display with 74HC595 Lesson 9 LCD1602 Lesson 10 Photoresistor Lesson 11 Thermistor Lesson 12 Controlling an LED through the LAN Lesson 13 DC motor