3 Review(s)

ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light and it’s VOC free resin. In the case of 3D printing, these are typically liquid plastic resins that harden when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin.3D PRINTERPrecautions:Shake well before useRecommeded temperature 20°C - 25°CAlways wear gloves and mask to avoid direct skin contactKeep away from children, dust and direct sunlightWash with plenty of water immediately if you get direct skin contact with resinELEGOO Photopolymer ResinPrinting Setting:Bottom Exposure:60sNormal Exposure:8sResin Parameters:Hardness: 84 D; Shrinkage: 7.1 %Viscosity (25°C): 150-200 mPa.sLiquid Density: 1.100 g/cm³Solid Density: 1.195 g/cm³Flexure Strength: 59-70 MpaExtension Strength: 36-53 MpaElongation at Break: 14.2Shelf Life: 1 yearGrey Resin StandardPhotopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints.Standard ResinThe fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and linear shrinkage, ELEGOO resin ensures the print accuracy and make sure all the parts printed to fit in the right place.Standard resinLeak-proof bottle fully wrapped with a plastic bubble bag and compact designed package box make sure the resin stays in place where they belong.Standard ResinWide ApplicationsIt has a wide range of application from board game miniatures to industrial parts and components.You can also use it to print your 3D CAD design works and make it from an idea into reality.