3 Review(s)

This is an RFID starter learning kit for Raspberry Pi. An RC522 RFID module, some common electronic components and sensors are included. The kit contains more than 120 components and electronic modules, these components can be divided into about 30 species. We have carefully prepared a Tutorial, and supporting experimental code routine for you to learn. The Tutorial includes 30 experiments, and the code. Through the learning, you will get a better understanding Arduino Uno R3, and will be able to make fascinating works based on Arduino. /////// Lessons: About Uno R3 Microcontroller, L-1: Blinking LED, L-2: Active Buzzer, L-3: Controlling an LED with a button, L-4: Controlling Relay, L-5: LED Flowing Lights, L-6: LED bar graph display, L-7: Breathing LED, L-8: Controlling a RGB LED by PWM, L-9: Playing Music, L-10: LCD1602 display, L-11: 7-segment display, L-12: A simple counter, L-13: Dot-matrix display, L-14: Controlling Servo motor, L-15: Photoresistor, L-16: thermistor, L-17: IR remoter controller, L-18: Temperature & humidity sensor DHT-11, L-19: ultrasonic distance sensor, L-20: 3-axis Accelerometer—ADXL345, L-21: 4x4 matrix keyboard, L-22: Controlling DC motor, L-23: Joy stick, L-24: A Simple Voltmeter, L-25: RFID module. /////// Package List: 1x EPICTAC UNO R3 Board, 1x RC522 RFID Module, 1x RFID ID Round Tag, 1x RFID ID Card, 1x Ultrasonic distance sensor, 1x ADXL345 Acceleration Sensor, 1x servo, 1x PS2 Joystick Module, 1x IR receiver HX1838, 1x Remote controller, 1x Dot-matrix display, 2x 74HC595, 1x DHT-11 Temperature and Humidity Sensor, 1x DC Motor, 1x L293D motor driver, 1x Relay, 1x LCD1602, 1x 7-Segment Display, 1x Four-digit segment display, 1x Active buzzer, 1x Passive buzzer, 2x Thermistor, 2x Photoresistance, 1x LED bar graph, 1x 4*4 Matrix keyboard, 2x Switch, 1x RGB LED, 8x Red LED, 2x Green LED, 2x Yellow LED, 2x Blue LED, 16x Resistor(220?), 10x Resistor(1 K?), 5x Resistor(10 K?), 5x Capacitor(104pf), 2x Capacitor(10uF), 4x Button(large), 4x Button(small), 1x Button cap(red), 1x Button cap(white), 2x Button cap(blue), 2x NPN Transistor(8050), 2x PNP Transistor(8550), 2x Potentiometer(10KO), 2x 1N4148 Diode, 2x 1N4001 Diode, 1x Battery holder, 1x Breadboard, 1x USB Cable, 40x Male to Male Jumper Wires, 20x Male to Female Jumper Wires, 3x Female to Female Jumper Wires, 1x Header(40pin), 1x Band Resistor Card.