3 Review(s)

How to Test Your Blood Glucose)Read the Gluco FM BG-203 Owner's Booklet therighty before test 1) Prepare system componentsGluco FM BG-208Gluco FM BG-208 Test StripsCode ChipLacing Device, Lancet1. Blood Sampling The blood glucose system requires a tiny of blood sample from your fingertip to test the blood glucose2) Measuring blood sampleBefore sampling your blood, wash your hands and the puncture site with an alcohol swab or sospywater. Rinse and dry thoroughly. Tum the cap anti-clockwise to remove it. Insert a new sterilized lancet into the lancet older andpush it down firmly until it stops, Twist off the protective disk until if separates from the lancetSlide the cap on until it stops (Avoid contact with the lancet pin)Adjust puncture depth by turning the Depth Adjusting Knob. The Depth Indicator shows the current depth selection. There are 5 optional depths. The higher of the number, the deeper ofpenetration After slide the Ejection Spring Controller back until it clicks. The Lancing Device is ready to use.Wash your hands and the puncture site with an alcohol swab or soapy water. Rinse and drythoroughly.Hole the Lancing device firmly against the side of your fingertip. Press the Release Buton Gently squeeze your finger to assist the blood flow. This will help you to get a drop of blood. Note: Choose two sides of your finger for the blood sampling site as it can reduce pain. ? Put the Protective Disk back on the lancet. Discard it properly.2. Testing your blood glucoseInsert a test strip, contact bar end first and facing up, into Strip Port. Push it in until stops. Themeter will automatically turn on and shortly display symbols on screen. Make sure all the symbols are completely displayed.• After the meter run self check, a test strip symbol will appear in the top-right corner of the screen The Blood Sample Reminder symbol flashes to remind applying blood."? Touch the blood drop to Top Edge at the end of test strip. Hold until the Confirmation Window is full. The meter begins testing with display countdown.Note: "E-4" error will appear when the test strip moved during measurement. ?At the end of the countdown, one beep sound to remind you test finished. The screen will displaytest result. Note: To avoid inaccurate test results affect 7, 14, 28 day average, user may delete thetest result by simultaneously pressing "S" Button and "M" Button.last