3 Review(s)

Once the meter is on, the temperature function can be used, in or out of liquid. 2. Press the TEMP button. The display will switch to temperature (in Celsius only). 3. To return to TDS mode, press the TEMP button., Package Contains: 1 Konvio TDS Meter, 1 Carry Pouch, Precautions 1. The meter is Pre-calibrated. Do not dip the meter beyond the water level limit. 2. Do not store the meter in high temperatures or direct sunlight. 3. Do not attempt to open the housing or tinker with the electronics of the unit., Auto-off function which turns it off after 10 minutes of inactivity. Highly Efficient and Accurate product, Let us look at the simple procedure for complex water testing. Using TDS meter it becomes very simple as follows: Remove the protective cap. Turn the TDS meter ON. Immerse the meter into the water up to the maximum immersion level. Lightly stir the meter to dislodge any air bubbles and wait for the display to stabilize. Press the hold button to view the reading out of the water. Turn off the meter, wipe and dry the electrode off before inserting it back into the protective cover Do not dip the meter beyond the water level limit Do not store the meter in high temperature or direct sunlight Do not attempt to open the housing or tinker with the electronics of the unit