3 Review(s)

Installation Instructions: Step 1. Keep the surface of the glass clean. Step 2. Measure the exact size of the window and cut the window film to the suitable size. Step 3. Peel off the protective film ( transparent film ), spray a lot of soapy water both onto window and the back side of the static film. Step 4. Install the wet side of the static film onto the wet glass, smooth the film with hands. Step 5. Use the squeegee or card to remove extra bubbles and water. Step 6. Trim off the margins, leaving 2-3 mm gap from the edge of the glass to the film. Step 7. Wipe out the surface water with a lint free towel.