3 Review(s)

INSTALLATION 1. Cleaning: Thoroughly clean the surface and keep it dry to ensure there are no dust or debris. 2. Measure & Cut: Cut the film to the desired size through the grid lines. 3. Apply: Starting from one side, peel off the backing gently whilst applying the film to the surface inch by inch (don't remove the backing at once). 4. Flatten: While applying the film, use a cloth, a squeegee or a card to remove the air bubbles or bump areas. 5. Tips: When sticking edges and corners, use a heat engine or hair dryer to soften under heat to make edges and corners more perfect.