3 Review(s)

Features:Anti-Slip Safety Tapes Provide A Safe, Non-Slip Surface Under Shoe Traffic to Prevent Unnecessary Slips and Falls. A Flexible Vinyl Backing Filled with A Gritty Mineral Abrasive to Deliver Traction on Flooring in Work Areas, Stair Treads, Construction Equipment, Ramp Ways, Transportation and Recreational Vehicles. These Tapes Are Designed for Indoor and Outdoor Use Wherever A Non-Skid Surface Is Required HOW TO APPLY: 1.Test that the safety tape is adhesive before installation by just peeling back a small section 2.Apply to smooth surface. Repair application area to insure it is smooth by filling in any cracks or depressions. Porous surfaces should be sealed; Never apply the safety tape over grout lines 3.Remove oils, dirt and flaking paint using an industrial cleaner 4.Be sure any soap residue is removed by flushing the surface. Surface must be completely dry 5.When peeling off paper backing try to keep fingers off the adhesive 6.Position and press into place pushing from the center out to the edges to remove air bubbles. A rubber hand roller helps to get maximum adhesion 7.The area can be used immediately after the tape is applied 8.The surface of the tape itself can be cleaned as needed using a mild detergent cleaner Specification: Product Size: Width x 2 inch / Glow Line width x 0.5 inch / Tape Length x 50mm x 5 m Product Weight: 266 gm Product Colour:Black & Green Glow Package Includes: 1 x Tape