3 Review(s)

Test that the safety tape is adhesive before installation by just peeling back a small section 2.Apply to smooth surface. Repair application area to insure it is smooth by filling in any cracks or depressions. Porous surfaces should be sealed; Never apply the safety tape over grout lines 3.Remove oils, dirt and flaking paint using an industrial cleaner 4.Be sure any soap residue is removed by flushing the surface. Surface must be completely dry 5.When peeling off paper backing try to keep fingers off the adhesive 6.Position and press into place pushing from the center out to the edges to remove air bubbles. A rubber hand roller helps to get maximum adhesion 7.The area can be used immediately after the tape is applied 8.The surface of the tape itself can be cleaned as needed using a mild detergent cleaner Product .