3 Review(s)

1. CLEAN: Clean up the surface thoroughly, making sure that there is clean enough. Wait the surface DRY completely before the installation 2. Measure & Cut: Cut the film to the desired size through the grid lines. It is suggested to leave 1 inch margins at each side for later adjustment 3. Apply: Starting from one side, peel off the backing gently whilst applying the film to the surface inch by inch (do not remove the entire backing at once) 4. Flatten: While applying the film, use a cloth, a squeegee or a card to remove the bubbles or bump areas 5. Enjoy: Trim off the margins, enjoy your new gorgeous marble top surface