3 Review(s)

Apply instructionStep 1 : Clean surfaces with mild soap and water before sticking them on.Step 2 : Measure the part of the paper to cover. Cut the paper to the proper size, leaving about 3 cm of extra overlap on all edges, which can help you for adjusting.Step 3 : While peeling the bottom paper, use a scraper to evenly brush paper from top to bottom, If the paper is found to be deviating during the process, you can peel it and continue to paste it again.Step 4 : If there is the bubbles or creases, pierce them with a needle and squeeze the air out. Additionally, the heat gun will be helpful because this is PVC material, and the heat can make its plasticity.Acrylic-based adhesive backing, not solvent-based like every other film on the market. Solvent-based adhesives can damage surfaces, coatings and finishes that the material is covering.ReminderThe Colour may look different for each monitor. Since computer screens have chromatic aberration, we can not make sure that the colour of our products will be exactly the same as the photographs.Enough rolls at a time to make sure they come from the same batch to avoid colour differences.The Paper you will receive may have some wrinkles on it or both ends, but it does not affect looking after use on a dry flat surface