3 Review(s)

From vinyl decals: These are die cut decals which means there is no background. If there is a background color in the image, it is only used as an example. The color of the background will be the color of the surface on which you put the sticker, or of course if you put it in a window. Vinyl decals come in 3 units: 1. The top layer is a transparent transfer ribbon. (Keep your decal or sticker attached until it is applied) 2. The middle layer is your decal or real sticker (It is inserted between the application tape and the wax backing) 3. The lower layer is the wax backing. (Protects the adhesive until the label is ready to be applied) 4 Do not wash in 24 hours. APPLICATION TIPS: 1. Do not apply on extreme cold or hot surfaces. Ideal temperature should be between 60 ° F and 90 ° F. 2. Do not touch the adhesive backing, the oils on your skin will prevent it from sticking. 3. Before applying the label make sure there is no wax or oily products on the surface. APPLICATION INSTRUCTION: 1. Rub the sticker to make sure that the transfer tape adheres correctly to the sticker. 2. Clean and dry the desired area. The stickers will stick better to clean smooth surfaces. 3. Remove the wax backing to make sure the sticker stays attached to the transparent transfer tape 4. Carefully place the sticker in the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 6. Use an object such as a credit card to make sure that the entire sticker adheres completely to the surface. 7. Slowly remove the transfer tape, making sure there is no part of the sticker on the transfer ribbon. 8. Check for air bubbles. In most cases, air bubbles can be worked up to the edge of the sticker, But if not, a pinhole will allow the air to come out and become practically invisible. Your sticker is now free of worries.