3 Review(s)

Flashing Tape is a versatile adhesive tape for instant flashing applications. It is easy to use, ready to apply, economical, multipurpose, all-weather, UV resistant, weatherproof, with outstanding durability. Omega Brand Butyl Flashing Tape can last for more than 10 years. Butyl Based leak-proof Flashing Tapes are adhesive tapes with one side of butyl adhesive protected by release film and another side is reinforced with aluminum foil. This tape is very useful to prevent leakages, fill cracks, joints for various surfaces like Metal, cement, asbestos, fiber, plastic, vinyl, etc. Omega Butyl Flashing Tape is widely used for flashing applications. Leak-proof Flashing Tape is a simple yet highly effective solution for waterproofing, sealing, and insulation. Roof Applications-Asbestos, Cement, Corrugated Roofing, Concrete, Zinc Sheets, Tin Sheets, Sealing of PEB Structures. Other Applications -Building cracks, Joints, Plywood, Steel, OSB,IBR,WPC. Sheets, Surface preparation: All surfaces should be clean, dry, and free from frost, grease, and lose materials. When cleaning contaminated substrates. When applying the tape to porous or friable surfaces, it is recommended that the surface be treated with a suitable primer, such as an exterior grade PVA, to seal and stabilize the surface. Application: To avoid creasing the foil, separate the foil and sealant from the backing paper as they are being unwound from the roll. Once applied in place, use a roller to ensure good adhesion to the substrate. Avoid joining in the flashing where possible. Benefits: Outstanding adhesion to a wide range of surfaces, Excellent UV Resistance, Remains flexible throughout its service life, easy and accurate to use, Very Little waste, No mess, Good tear, and puncture resistance