3 Review(s)

Serial ATA power cables are usually 4 or 5-pin cables with 15-pin connectors. SATA power cables currently use an IDE/ATAPI to SATA power adaptor. One end of the SATA power cable is a typical 4-pin IDE/ATAPI power connector (which gets connected to an unused power cable from the power supply) and the other end (15-pin connector) gets connected to the SATA hard drive. Specification: Connector A : 15-pin male SATA power connector. Connector B : 4 pin Female Molex connector. Cable Length : 20cm. Colour : as picture. Compatible with: SATA hard drives ,SATA optical drive, etc. Product contents: 5 × SATA 15pin Male Power Connecter to Molex 4pin Female adapter Cable. Product Notes: The Molex connector provides only 5 and 12 VDC power. While many SATA drives only require these power levels, some require the additional 3.3 VDC power provided for in the SATA specification. Make sure your drive does not require 3.3 VDC before purchasing this adapter cable. Package: 1 x SATA 15pin Male to Molex IDE 4pin Female Cable.