3 Review(s)

1. ( Injection Cleaner ) - The low-viscosity engine oil creates a heavy-duty lubricant film on all frictioning and sliding metal surfaces. It reduces friction, guaranteeing the aggregates run more smoothly. That produces these benefits significant fuel and oil saving, scientifically proven wear reduction, high reliability, antifriction properties. Intended use suitable for all commercial motor oils in gasoline and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Our dosage recommendation, add from 3 - 5 percent to motor oil. For motorcycles with wet clutches, add maximum 2 percent of the oil filling volume. 2. ( Radiator Cleaner ) - A concentrate specially developed for cooling systems in general but particularly those in motor vehicles. Dissolves contaminants containing lime and oil in radiators, heating systems, pipes and in engines. Modern formula containing complexants with active cleaning agents. Properties does not contain acids or alkalis, disperses sludge, removes oil and grease residues, chemical conversion of lime, neutralizes acids, neutral behaviour in contact with rubber and plastics and compatible with anti-freezes. Areas of application, suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. Add contents to the cooling water. Run the heating system. Depending on the degree of contamination let the engine run approximately 10 to 30 minutes. Drain the cleaner and flush out the cooling system with water. Fill the cooling system according to the manufacturer's instructions. The content (200 ml) is sufficient for 10 litres of water.