3 Review(s)

Complex anti-wear additive for all types of diesel fuel and especially for types I and II with a low sulfur content according to GOST R 52368-2005 (European specification EN-2005). To get the maximum effect, you need to use it constantly. The effect of the application becomes noticeable after 20 hours of driving (about 1200-1600 km). Forms a stable and strong lubricating complex Estero-oil film with a high degree of adsorption on the components and parts of the fuel system, which significantly reduces the coefficient of friction of the contacting surfaces and significantly reduces their wear. This effect is especially evident in high-pressure fuel pumps in a pair of plunger-sleeve, injectors and pump-injectors; which significantly increases the service life of this expensive equipment. For a high-pressure fuel pump, this eliminates the main cause of wear of the plunger pairs; low-quality dry; diesel fuel Forms an additional stable and strong lubricating complex Estero-oil film with a high degree of adsorption in the combustion chamber in pairs: the sleeve ring and the valve plate-the seat in two cycles out of four from the moment of spraying the fuel-air mixture ; which significantly reduces the coefficient of friction and wear of the sleeve and compression rings, as well as valve seats, especially those that are not hardened. Completely burns down together with fuel without leaving a carbon deposit Application: Add to the tank in the ratio of 50 ml per 50 liters of fuel. Recommended for regular use.