3 Review(s)

FULLY AUTOMATIC FUNCTIONS: This system energizes monoblock pump motor (up to 2 HP) when water level in overhead tank goes below the preset point and switches off the motor when overhead tank fully fills up. It also switches off the motor immediately when water finishes in reservoir tank. This way the system, not only saves water, manpower & electric energy but also enhances the life of pump motor.OPTION FOR INSTANT PUMP MOTOR START: The controller also has an option for starting pump motor with one soft press button before water level in overhead tank reaches the prefixed level for automatic switch-on, but it will switch-off the motor automatically when overhead water tank fully fills up. However, this function will not activate pump motor if there is sufficient quantity of water in overhead tank. Quantity of water for using this option may vary according to setting/adjustment of sensor-switch for switch on & off levels in overhead tank.MAINTENANCE-FREE SENSOR-SWITCHES: The controller, in strong shock-proof ABS cabinet, has maintenance free sensor-switches, concealed in strong plastic box, which sense levels of water in tanks without passing any electric current into the water, thus, doing away with the hassles of maintenance due to absence of chemical reactions that may cause corrosion/oxidation to these sensor-switches.EASY TO INSTALL: The system is very easy to install as it has only one sensor-switch in each tank which can be connected, color-wise, as per sticker pasted above the connectors. This system is also suitable for Open Well pump motors with single phase up to 2 HP starters having only a run capacitor. LED INDICATORS: This system also has LED indications for motor activation and system on standby. CAUTION: This is a 220 Volts (AC) device, must be installed by an Electrician only. NOTE: Wire for connecting tanks with controller is not included in the package. Please use proper .5 mm (3 core) wire for this purpose.