3 Review(s)

This is cleaning liquid / solution for - INKJET DESKTOP PRINTERS HEAD OR CARTRIDGES WHICH ARE PARTIALLY WORKING or PARTIALLY CLOGGED due to printers have not been used for some time or when used low grade Inks in Cartridge / printer refilling. Instead of taking printer to costly repair shop, one can try following steps for Print Head Cleaning: 1) Fill the syringe with 2 ml of head cleaner solution and drop few drops on the head - inside the printer for each colour and let it be absorbed for few minutes and repeat the procedure one / two times. 2) Also try by take NEW Empty Cartridges according to Printer Model & No. of Colures. Fill about these Empty Cartridges with Cleaning Solution. Install these cartridges in the Printer. Take few sheets of plain Copy Paper & Print few sheets. According to ink in print head image will be Dark & slowly it will be Lighter and Lighter. After some time, the print will look like printed with water. Leave the Printer overnight or for 8~ 10 hrs like this. Then again take out few prints. You will see the Print Image is almost like printed with water. 3) Now install your Ink Cartridges & take out few prints. First Few prints will be lighter & slowly prints will be darker & darker. You will see print results are better after this Exercise. If No improvement that means your there is major head blockage, so consult Professional Experts. FOR CARTRIDGE CLEANING FOLLOW INSTRUCTION AS SHOWN IN PICTURE. Please note: This solution is good only for PARTIAL head cleaner / Minor blockage. NOT FOR DRIED / FULLY BLOCKED CARTRIDGE OR head blockage problem