3 Review(s)

INSTALLAION PROCESS: 1. Clear your phone screen perfectly with alcohol wipes. 2. Stick an anti dust sticker on the upper side speaker and keep the phone on flat surface. 3. Open the cap of glue bottle and drop the 70% of glue on the middle of the phone screen.4. Remove the back side film of tempered glass and put the glass on the mobile screen, glue will automatically spread on the screen with glass weight. if there is any air or bubble press lightly add slide bubble to the border,5. If you face air or bubble on the borders then only use rest 30% of glue by sliding the glass upper side and lower side, 6 . Apply UV light on center of display for 50 seconds only after if there is no air or bubble. 7. Once you use UV light for 50 seconds, glass become stable and glass will not move, then clean the borders and corners of mobile. 8. After cleaning again apply UV light on corners and borders for 2 MINUTES. NOTE: 1. If you are applying UV GLASS for the first time, please watch videos of UV GLASS APLICATION. 2. Use UV LIGHT only after glass set properly to the mobile screen, Glue is