Ronsie door_stoper Door Bottom Sealing Strip Guard for Home Floor Mounted Door Stopper(White, Red) | Zipri.in
Ronsie door_stoper Door Bottom Sealing Strip Guard for Home Floor Mounted Door Stopper(White, Red)

Ronsie door_stoper Door Bottom Sealing Strip Guard for Home Floor Mounted Door Stopper(White, Red)

Quick Overview

Rs.599 on FlipkartBuy
Product Price Comparison
Stopper Door Sweep - Door Draft Blocker Weather Stripping Under Door Bottom for Interior Doors Seal Strip Insulation for Weatherproof, Soundproof, FEATURES: - This door draft stopper will keep the bugs and snakes out. Preventing from sneaking under door and chewing through food. - Windproof & Waterproof. Door draft bloccker helps further from drafts & excess sand coming in. - Soundproof Door sweep reduces the noise level from outside, and vice versa. - Seal the door which is minimize unwanted air leakage and ingress of bad weather. - Improve the door's insulation value ( the cold air can't get out from the room as well as the hot air can't easily get out of the room). How to apply/peel off the door seal strip 1. If the temperature is too low, the glue of the door seal will harden, used a hairdryer to heat the adhesive before applying it. 2. If you want to tear the door sweep off the door, you can use a hair dryer to heat the door strip firstly, then pouring alcohol on the glue of seal strip and wait for 3-5min , the door draft stopper will peel off automatically without taking the paint away. INSTALLATION: 1. Marking the same size as the door and cut the excess strip of door bottom seal . 2. Cleaning the door bottom. 3. Peeling off the backing film. 4. Applying the weather stripping insulation to your door. MATERIAL: SILICONE NOTE: * Tear off the red film. * Clean the door to make sure the door haven’t dust and oil. * The item also need to make sure the door keep dry. * After installation please be strength press the item to make it more firm. * If the temperature is too low, used a hairdryer to heat the adhesive before applying it. * Don't apply it completely flush with the floor. Allow 1-2mm (just a hair) of space between this and the floor or else it'll drag and it's difficult to open/close the door.