3 Review(s)

Step 1 - Clean the surface thoroughly using a dry cloth or sponge. Step 2 - Measure the height of the area & trim wallpaper 3 inches higher than the height of the area. Step 3 - Remove 3 to 4 inches of support paper and paste it to the surface. Step 4 - Start at the top and gradually work your way down the surface. Step 5 - Use a dry, soft, easy-to-slide cloth to press on the surface, and move left & right, to get rid of bubbles. Step 6 - Press firmly on all sides. Repeat steps 4 and 5 in increments of 2 to 3 inches until you reach the bottom of the surface. Step 7 - Dispose of the extra wallpaper on the bottom with a blade or cutter. Step 8 - Align the second roll with the first, with a 1-inch overlap to ensure continuity of design. Step 9 - Perform the same procedure for the remaining areas to be covered.