3 Review(s)

RECEIVER OPERATING MODE SETTINGS Momentary Mode Setting Press the learning button of the receiver once , it comes into Momentary setting mode. Wait for a moment, the LED indicator of the receiver board will be on. Press the remote button,the LED indicator will flash 3 times and then go out, the setting is successful. Toggle Mode Setting Press the learning button of the receiver twice, it comes into Toggle setting mode. Wait for a moment, the LED indicator of the receiver board will be on. Press the remote button,the LED indicator will flash 3 times and then go out, the setting is successful. Latching Mode Setting When selecting the Latching Mode, two different buttons need to be set, the first button is set to "ON", and the second button is set to "OFF". Press the learning button of the receiver 3 times,it comes into Latching setting mode. Wait for a moment, the LED indicator of the receiver board will be on. Press the remote control button “ON”, the LED indicator flashes 3 times. Press the remote control button “OFF”, the LED indicator flashes 3 times and then goes out, the setting is successful. Delay Mode Setting Press the learning button of the receiver 4 times, with a delay of 5 seconds. Press the learning button of the receiver 5 times, with a delay of 10 seconds. Press the learning button of the receiver 6 times, with a delay of 15 seconds. Press the learning button of the receiver 7 times, with a delay of 20 seconds. Wait for a moment, the LED indicator of the receiver board will be on. Press the remote button,the LED indicator will flash 3 times and then go out, the setting is successful. Automatic energize when power on Press and hold the learning button until the led indicator light flashes, the setting is complete. How to reset Press the learning button of the receiver 8 times, the receiver will clear all remote control data in the memory. After the receiver resets the data, the remote control needs to be re-paired with the receiver t