3 Review(s)

This film is suitable for smooth, flat clean glass surface. Do not use on rough, uneven, frosted glass or other material. 2. Please make sure to peel off the backing film before applying and apply the smooth side of film to glass. Otherwise it will not be firmly adhered. 3. This window film can show the colors when the light is going through or reflected, so usually you can’t see the colors of window film before install. 4. Use a hair dryer to soften the film under cold weather. Step 1. Keep windows or glass flat and clean Step 2. Measure and record the length and width of the surface to be pasted Step 3. If you need to cut, draw lines the window film with markers. To facilitate cutting please make sure the edge of the protective film and the glass surface have a 1cm gap. Step 4. During installation, please spray a large amount of water on the glass surface and the smooth surface of the window film for effective adhesion?The more water flowing, the better? Step 5. Remove the Static Film from backing protect sheet (The window film has two layers, The protective layer needs to be remover before application) Step 6. Stick the window film on the wet glass and scrape out the air and excess water under the film with a card or scraper. Trim off the excess material and stand for a period of time to make it stick more firmly