3 Review(s)

1. Connect the red cable to the positive (+) post of the non-working battery after both vehicles turned off, and the other end of the red cable to the positive post of the working battery. 2. Connect the black cable to the negative (-) post of the working battery, and the other end of the black cable to a metal point on the non-working car, such as a bolt or bracket away from the battery 3. Start the working vehicle, after a minute or two, start the disabled vehicle., let it run for several minutes before turning it off, so the battery can recharge. 4. Disconnect the cables in reverse order from how you connected them. This car jumper cable is a necessity that every car owner needs. The car jumper cable rated at 1000 A is fitted with surge protection to accommodate later-model vehicles with engine computers. The cable has colour-coded wires and leads which makes using them much more easy. Instructions To reduce the risk of vehicle damage or battery explosion before use. Please read the instructions carefully before use