3 Review(s)

VOLTZ hydraulic cylinder is not for the CAR (1). when several hydraulic jacks work at the same time, they should be directed by someone to make the lifting or falling simultaneously. Two adjacent hydraulic jacks shall be supported with wooden blocks to ensure that the gap is secured against sliding. (2). when using hydraulic jack, always pay attention to the sealing part and pipe joint part, and must ensure its safety and reliability. (3). hydraulic jacks are not suitable for sites where acids, alkalis, or corrosive gases are applied. 20 ton Hydraulic Ram Jack Parameters: Up and down without obstacles: Special treatment of piston to prolong service life Fast Connector + Plastic Dust-proof Cover: The joint adopts threaded ZG3/8 fast joint, thread locking and compact structure. Model: FPY-20D; Tonnage: 20T ; Stroke 1: 16MM; Stroke 2: 14MM; Stroke 3: / ;Total stroke: 30MM Oil storage capacity: 41CC; Self height: 57MM; Weight: 2.8kg; Compression area: 19.6mm² Inner diameter 1: 30mm; Inner diameter 2: 50mm; Inner diameter 3: / ; External diameter: 79x99mm CP-180 Hydraulic Hand Pump Parameters: Hydraulic pump body: Smooth surface, good sealing, no oil leakage. Relief Valve: When working, tighten the return valve clockwise;When releasing pressure, loosen the return valve counterclockwise. Oil Tube and Joint: Comes with 0.8m oil tube. Model: CP-180 High pressure: 853PSI(60kg/cm²) High pressure oil quantity: 20cc Oil storage capacity: 400cc Weight: 3.8kg