3 Review(s)

VOLTZ tools Greater capacity and more speeds than our 9 speed gives every keen DIY person, maintenance dept., or workshop more opportunities to carryout larger jobs. Built to last, VOLTZ tools 9 speed Bench Pillar drill ,has the head-stock manufactured in high quality cast iron, the base and column are of accurately machined cast steel and may be secured permanently to most types of workbench or stand to provide a reliable, accurate and easy to control eye level pillar drill. The 16mm keyed chuck is held in place by a JT hobby style taper drive shaft similar to the shafts used on industrial style pillar drills fitted with morse tapers. The vertical operation of the chuck is controlled by the three spindle side handle. Safety dictates that a transparent chuck guard is fitted and an adjustable depth gauge comes as standard. Power to the chuck is through the twin 9 speed taper pulley arrangement and power to this is from a 500w capacitor start induction run 230v electric motor. Changing speed is easy by releasing the motor tension bolt which slackens the belt on the drive pulley and moving the drive belt up or down the corresponding grooves in the pulleys. Drill speeds and corresponding pulley arrangements are shown on a chart fixed to the head-stock. The top cover encloses the drive assembly and for safety a micro-switch cuts out the motor when the cover is opened. The industrial style no- volt release stop/start switch prevents the motor from starting up in the event of power failure protecting the operator. Technical Specifications: Model No. : VZ4116QA Motor : 230V~50Hz 500W Spindle Speed : 9 speed Motor No Load speed : 1450rpm Chuck : B16/3-16mm Spindle Taper : MT2 Max.Drilling Depth : 50mm Table Size : 168×168mm Table Tilting Range : 0°-45° Base Size : 320×200mm Column Diameter: 46mm Distance Spindle/Column : 115mm Distance Spindle/Table : 250mm Distance Spindle/ Base : 330mm Overall Height : 600mm Packing Size : 462×362×230mm Gw/Nw-20/19kg .