3 Review(s)

INSTALLATION INSTRUCTIONS:Step 1. Keep Window or Glass clean.Step 2. Measure width and height of the glass area.Step 3. Cut the film 3mm wider than the glass size.Step 4.Find the green arrow in the corner of the product. then peel off the transparent backing of film.Step 5.Spray enough water on the glass surface and back side of the film.Step 6.Make sure the four corner are steadily adhere to the glass.Step 7. Use the squeegee to extra water &air from center with the proper strength.Step 8. Cut out the excess part of 3mm gap from the edge of glass to the film.