3 Review(s)

Installation Instructions:1. Measure the surface and cut the film. Leave an extra inch margin on each side for an easy adjustment.2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.3. Peel off the transparent backing film along a short side. (Very Important!!!)4. Spray a lot of water or soapy water both on the smooth side of the window film and the window, then install the window film onto the window.5. Use the soft towel or squeegee to wipe the film back and forth to make sure that the bubbles and water have been totally removed.6. Trim off the margins and use a cloth to flatten out the film. Here you go!