3 Review(s)

Use Method:Use the Scale on Stable and flat surface. Do not shock the weighing Tray. Put down the product Quality lightly weighing weight several times before the scale had been used. It could help the inner element to preheat. Then the Scale will be more accurateCalibratingCalibrating is needed only if the scale could not weigh correctly. Calibrate capacity: 500gTurn on the scale then press (Unit) key until "CAL" Display. Then calibrating weight will show. Put the same weight as the scale shows. Then press "ON/OFF" Key, "PASS" will show. Calibration finished. If the scale shows "OUT2" when it had been turned on, please calibrate it according to the method below. Turn off the scale, press (ON/OFF) and (UNIT) at the same time until the screen shows a group digit. Then press (ON/OFF) Screen will show "CAL", then a certain calibration weight. Put same weight on the scale tray. Press (ON/OFF)ATTENTION: Bring the scale protect cover lightly. Put the scale on a stable surface without shocking. Scale should be used in no wind environment. Do not use mobile or other electronic object which will produce radio. Scale weighs not correctly reason: battery low, calibrate wrong, overload or not use on a flat surface. Please refer the scale correct according to the reason above.