3 Review(s)

Description: Spanner for Oxygen gas Cylinder, Nitrous Oxide gas cylinder, and Dry air & Nitrogen gas cylinder. Used for Opening and tightening spindles of B-type and Bulk Oxygen Cylinders and fitting Mox and FA valve regulators to cylinders. This is used in hospitals, nursing homes, Diagnostic centers, Home care patients, and clinics. It is used for fitting the FA Valve regulator, Single stage single gauge regulator, Single stage double gauge regulator, Double stage regulator to an Oxygen cylinder. Process for Using the spanner: To fit the regulator, tight the bull nose nut in a clockwise direction. and open the spindle slowly to release the gas. You can see the gauge showing the pressure of the cylinder and use the gas by releasing the nob in anti clockwise direction. This is also used for fitting the Dry air regulator and nitrous Oxide regulator to the respective gas cylinder. The application of the spanner is to fit the regulator to the cylinder. This is also used for opening and closing the spindle releasing and stopping the gas and tightening the valve nut. The other end of the spanner is used to for repair and change the gauge. As this is multipurpose, it is called two one one-spanner in the Healthcare Industry. It is chrome plated for an elegant look and to avoid rust. It is made of forging Mild steel. This is also generally supplied as a spare part along with an anesthesia machine. It is generally maintained at Medical oxygen gas plants in Hospitals. This can also be used for tightening the valve nut of a cylinder. This is done in case of any leakage of gas from the spindle side. This is also used in Ambulance along with portable oxygen cylinders. Replace the spanner once a year as there may be wear and tear in the hospital to avoid bull nose damage.