3 Review(s)

Apply the Polish:By Hand:Apply a small amount of polish to a microfiber applicator pad.Work on a small section of the car (about 2x2 feet) at a time.Use straight, overlapping motions with even pressure.By Machine (if using a dual-action polisher):Apply a few small dots of polish directly onto the pad.Spread it over the section before turning on the polisher to avoid splatter.Start at a low speed, then gradually increase to a moderate speed.Buff the Surface: Allow the polish to haze (usually a few minutes), then use a clean microfiber cloth to buff the area. Use a back-and-forth motion and switch to a clean section of the cloth as needed.Inspect Your Work: After polishing the entire car, inspect the surface for any missed spots or areas that need additional attention.Clean Up: Wipe down your applicator pads and microfiber cloths. Store any leftover polish in a cool, dry place.Optional – Wax or Sealant: After polishing, consider applying a wax or sealant to provide additional protection and enhance shine.