3 Review(s)

installation steps:1. Clean the surface;2. After measuring the required amount, cut the vinyl wallpaper into the corresponding size. It is recommended to leave a margin of 2-3cm on each side for later adjustment;3. Tear off the backing paper of the wallpaper from one of the corners, please do not remove it all at once;4. When peeling off the backing paper, use a towel to smooth the wallpaper, the order is from top to bottom, from the middle to the edge;5. After pasting, if there are bubbles on the surface of the wallpaper, you can use a needle to pierce a small hole on the bubble to remove the gas.