3 Review(s)

Make your aquarium cleaning process quick and hassle-free. This Aquarium Fish Tank Siphon Vacuum Water Pump from YELONA® makes partial water changes easy and effective with minimum effort. A couple of squeezes on the hand pump is all that is needed to get the pump working. While emptying water from the aquarium the cleaner pump will also suck up dirt and debris from the bottom. Easily remove water from your aquarium and vacuum waste away from the base. Move the nozzle around the ceramic media to take out waste and debris with the water. Operating Ways For Use: Gravity Required: 1. The source fluid should be higher 11 inch or more than the target one. 2. Connect the hose to both ends of the rubber pump. The black arrow on the rubber pump point to flow direction. 3. Put the input side of the hose in the source fluid. Use the hose clips to secure the hose, make it won’t flop out or leak fluid. 4. Squeeze the hand pump 3 or 4 times. 5.When liquid comes close to rubber pump, place the outlet hose in the target container. 6. When the fluid level is too low at the bottom of the source container, the pressure will not enough to keep fluid flowing naturally, then need to keep squeezing the rubber pump to finish the pumping job. Please Note: 1.If the siphon pump hoses have kinks, please try to soak the kink part into a small amount of hot water for 1-3 minutes to restore it, then will not affect the use of function. 2. Not suitable for drink water, salt water and any chemical liquids. Package Includes: 1x Hand pump 2 x Hoses (1Mtr Each) 2 x Fixing Collar