Aseenaa Brass Water Spray Nozzle for 1/2 Hose Pipe With 3 Attachment (Without Hose Pipe) Adjustable Spray + Attachment

✔ Durable & Strong Constructed of pure brass and is heavy 1/2 not rusted Long lasting Due to its brass construction, it does not break if it hits the ground. Tested over a large number of turns. Includes two parts Spray fits firmly inside the 1/2" holder, which is connected to the pipe via the holder.

✔ You can use the pipe without the spray by simply removing the spray and leaving the holder on the pipe. No need to remove the holder, then. A clever design. No need to remove the holder, then. A clever design. Adaptive fit Attaching it to 1/2" pipe takes hardly any time. works with half-inch hose pipes of any thickness.

✔ The No Squeeze, easy flow control allows for effortless use. Easily twist the nozzle head to turn it on and off or to control the water flow and patterns. Water gun for car washing doesn’t require you to hold down a handle for water to flow or fumble with flimsy stops to set a flow rate. With this spray water gun , simply turn the nozzle head to your desired water flow and it stays constant without anymore effort on your part.

✔ Water spray nozzle is a flow controller so it creates extra pressure by flow control. It can boost pressure to some level only. If incoming water pressure from the hose pipe is low then it cannot boost the pressure very high. For insufficient water pressure from the tap (hose pipe), if you need very high pressure then you require extra water pump.

✔ There is no need to be concerned about the hose nozzle degrading into plastic trash after a season of spraying. Spray comes with internal seals for a precise fit with 1/2" holders. Inner seals on the holder allow it to perfectly fit the pipe. Simple to assemble and disassemble. 9.5 cm Nozzle Length 3.5 cm is the connector length.

• Water Pressure Is Depended On Your Water Tank Height. More Height More Pressure Low Height Low Pressure.
• 1/2" High Quality Pure Brass Spray Nozzle, Adjustable Spray patterns. Connects to common half inch hosepipe. Just turn slightly to change spray pattern - for watering garden, washing cars, washing house, etc. Set of 1 Nozzle + 3 Connector. Foam packaged in box, for no scratches during shipping.
• Heavy, made of pure brass. 1/2". Rust free. Long lasting. Strong & Durable. Does not break if it falls on ground, because its brass. Tested for several thousands of turns.
• Comes in two parts. Spray fits snugly into the 1/2" holder, and holder attaches to the pipe. Can use pipe without spray also - just pull out the spray leaving holder attached to pipe. So, no need to remove holder. Smart design. So, no need to remove holder. Smart design.
• Spray has inner seals, that provides perfect fit with 1/2" holder. Holder has inner seals to grip the pipe for perfect fitting. Easy to install, easy to disassemble. Nozzle Length 16cm.
• Smart fit – Takes less than a minute to attach it to 1/2" pipe. Works with all thickness of half inch hose pipe. Has mirror finish.