3 Review(s)

Instructions for use (The following processing steps are for reference only, applicable to cases where the repaired area is not very large)1. Cleaning: use soapy water or other supplies, clean the scratches and dry them.2. Shake well: Shake the product before use.3, lacquer: First, select the scratched parts, fill with a pen, repeatedly apply 5 minutes apart, smear to a part of the original car paint plane4, sandpaper: lacquered parts after 2-3 days of drying, during the period (prohibition of machine washing), sandpaper soaked in soapy water for 20-30 minutes, making it soft.5, water grinding: After the paint is dried, it can be ground with water, and sanded in the same direction with the sandpaper in advance, until the original paint surface is equal.6, confirm the grinding site: observe the grinding site with the naked eye. Remember not to use excessive force to avoid injury to the original paint.7. Grinding: Grinding with wax, rubbing on the cloth, grinding like a circle.8, the final confirmation: if the surface of the paint is not flat after grinding, re-operation can get better results.9. Wax: Apply the polishing wax on the dry cloth with a polishing wax. Apply the wax in a clockwise direction to the wax for about one minute. Dry it with a towel or cloth and wipe it clockwise.