3 Review(s)

How to use1. Place the solder core on the solder to be removed, and then push the heated iron tip onto the solder core. Solder will be absorbed.2. Remove the tin wire after the solder is absorbed.3. Cut off the used part of the wick with pliers.4. If the solder is not completely removed, repeat steps 1,2 and 3. Absorbability may vary depending on solder type have good absorbability.Note:1. Only contact the handle and the wick pack when welding. It can cause severe burns.2. To avoid fire, do not use soldering irons and unsolder lamwicks around inflammable objects or in explosive environments